Brinter® Bioprinter Publications

Two-Photon Polymerization of a Polymer-Ceramic Hybrid Material with a Low-Cost Nd:YAG Laser: Preliminary Resolution Study and 3D Fabrication

https://www.ingentaconnect.com/content/ben/mns/2010/00000002/00000002/art00005?crawler=true Two-Photon Polymerization of a Polymer-Ceramic Hybrid Material with a ...
Read More

Investigation of the optimal processing parameters for picosecond laser-induced microfabrication of a polymer-ceramic hybrid material

https://iopscience.iop.org/article/10.1088/0960-1317/21/6/065033 Investigation of the optimal processing parameters for picosecond laser-induced ...
Read More

Pico- and femtosecond-laser induced crosslinking of protein microstructures: evaluation of processability and bioactivity

https://iopscience.iop.org/article/10.1088/1758-5082/3/4/045002 Pico- and femtosecond-laser induced crosslinking of protein microstructures: evaluation ...
Read More

Two-photon microfabrication of poly(ethylene glycol) diacrylate and a novel biodegradable photopolymer – comparison of processability for biomedical applications

https://onlinelibrary.wiley.com/doi/10.1002/pat.2002 Two-photon microfabrication of poly(ethylene glycol) diacrylate and a novel ...
Read More

Two-step crosslinking to enhance the printability of methacrylated gellan gum biomaterial ink for extrusion-based 3D bioprinting

https://www.sciencedirect.com/science/article/pii/S2405886621000580#appsec1 By Hatai Jongprasitkul, SannaTurunen, Vijay Singh Parihar & Minna ...
Read More

GET A QUOTE

Brinter® Bioprinter Publications

Two-Photon Polymerization of a Polymer-Ceramic Hybrid Material with a Low-Cost Nd:YAG Laser: Preliminary Resolution Study and 3D Fabrication

Investigation of the optimal processing parameters for picosecond laser-induced microfabrication of a polymer-ceramic hybrid material

Pico- and femtosecond-laser induced crosslinking of protein microstructures: evaluation of processability and bioactivity

Two-photon microfabrication of poly(ethylene glycol) diacrylate and a novel biodegradable photopolymer – comparison of processability for biomedical applications

Direct laser writing of microstructures for growth guidance of human pluripotent stem cell derived neuronal cells

Direct Laser Writing of Proteins and Synthetic Photoresists for Neuronal Cell Growth Guidance

3D bioprinting of the kidney – hype or hope?

Photocross-linkable Methacrylated Polypeptides and Polysaccharides for Casting, Injecting, and 3D Fabrication

Ex vivo drug screening informed targeted therapy for metastatic parotid squamous cell carcinoma

Ex vivo modelling of drug efficacy in a rare metastatic urachal carcinoma

START-UP OF A FGF (Fused Granulate Fabrication) 3D PRINTER

APPLICATIONS AND TECHNOLOGICAL MATURITY OF ADDITIVE MANUFACTURING

Novel bioink design for 3D bioprinting of human pluripotent stem cell derived corneal epithelial cells

Sociotechnical alignment in biomedicine: The 3D bioprinting market beyond technology convergence

Protein-Based 3D Biofabrication of Biomaterials

Emulating Human Tissues and Organs: A Bioprinting Perspective Toward Personalized Medicine

Lab Equipment for 3D Cell Culture

Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends

RESTORE: Cartilage Bioprinting Technology Development

Suitability of screw extrusion 3dprinting tool for polymer-based drug formulation

Development of 3d-printable composite for applications in low temperature 3dprinting

Commissioning of brinter granu tool

Thermoplastic Cellulose-Based Compound for Additive Manufacturing

Two-step crosslinking to enhance the printability of methacrylated gellan gum biomaterial ink for extrusion-based 3D bioprinting

Title