Pneuma Triaxial Pro

4,400.00

The Pneuma Triaxial Pro print head enables printing of up to three different materials simultaneously, i.e., the core material,
intermediate material and the outer shell material. The print head comes with a heating function enabling a constant temperature from RT to +66 °C in the biggest syringe barrel (10 mL). In addition, the print head is equipped with an integrated
UV/Vis LED module emitting at a wavelength of 365 nm, 405 nm or 450 nm.

This action will let you pay a deposit of 4,400.00 for this product
SKU: 3502 Categories: ,

Description

The dispensing with Pneuma Triaxial Pro print head is based on the pneumatic extrusion. The triaxial needle enables printing of up to three different materials simultaneously, i.e., the core material, intermediate material and the outer shell material. The standard sizes of the triaxial needle channels are: inside needle 26 G (I.D.=0.254 mm), middle needle 19 G (I.D.=0.690 mm) and the outer needle 15 G (I.D.=1.37 mm). In the standard design, all the needle tips have the same length. Custom needles with other inner diameters and tip lengths can be delivered according to a request. The print head comes with a heating function enabling a constant temperature from RT to +66 °C in the biggest syringe barrel (10 mL). In addition, the print head is equipped with an integrated UV/Vis LED module emitting at a wavelength of 365 nm, 405 nm or 450 nm. It allows in situ photocrosslinking of photosensitive non-viscous bioinks during the deposition process. Pneuma Triaxial Pro is compatible with various commercial and noncommercial low-to-medium viscosity hydrogel bioinks and pastes.

Reviews

There are no reviews yet.

Be the first to review “Pneuma Triaxial Pro”

Your email address will not be published. Required fields are marked *